Sonic State Studio / Plug-ins /
 Akai QuadComp At a Glance   arrowCasio News(22)   Streaming Video (7)
Picture needed
arrowReleased:  arrowVersion: 0.00
arrowRated: Not Reviewedarrow Add review:  (0)
arrow Plug-ins LinksarrowSubmit a link
arrowSoftware: Win 95/98, Mac,
arrow Plugin formats: VST. Audio Units. RTAS
sonicbot writes:
While it is possible to use an ordinary compressor for tightening up and adding punch to a stereo mix, it is very common that low frequencies can cause "pumping" effects on the overall signal. However, by splitting the signal into 4 different frequency bands, each frequency region can be separately processed. This is achieved on the QuadComp using a series of crossover filters. These filters are constructed as linear phase FIR filters in order to produce a signal path which is perfectly free of phase errors.

Good Points
You can set the crossover frequencies for the 4 bands. Each band has controls for Threshold, Ratio, Attack and Release.
 

 Akai QuadComp Specifications:

Software supported:
Any Windows / Mac VST host

 QuadComp Links


Try the Plug-ins links page for more..