|
|
|
| MTR Ltd HPA-6 At a Glance |
|
Tony Reeves writes:
|
|
Perhaps the most high powered and reliable headphone amp available. There are two separate main stereo inputs on ¼" jacks, plus a stereo Auxiliary input feeding stations 1 and 2 (or any combination of all six by simple internal re-wiring). This Auxiliary signal is added to the main inputs, and can be used for click tracks, talkback from the control room for more effective communication between the engineer/producer and musicians, rehearsing to a tape/CD/minidisc, etc. A two-colour led is fitted to each of the three inputs, showing green for signal present, and red when approaching input overload. The Main Input 2 also has bass and treble boost and cut. Each of the 6 headphone outputs has its own volume control, an input 1 or 2 selector button, and a mono switch sums the left and right signals. The rear panel has duplicate input sockets for easy rackmounting. Very solid all-steel construction, and volume is more than ample with headphones ranging from 8 to 2,000 ohms.
|
Good Points
Made in England. Very Reliable. Excellent sound, ample volume
Bad Points
None
|
| |
MTR Ltd HPA-6 Specifications: |
Analog IOs:
3 inputs, 6 outputs
Midi IOs:
0
Other IOs:
0
|
EQ:
0
Dynamics:
0
FX:
0
|
Upgrades/Extras:
Stereo Headphone Amplifier
|
HPA-6 Links |
Try the Outboard links page for more..
Add Linkto this page
(Links submitted here will also be added to the Outboard Links page)
|
|
|
|
|
|
Released: 2001
