|
If your disk drive on the QX1 seems to have died, don't throw it away quite yet. Of course if you already considered it to be junk then yes go ahead.
I found a trick for getting the disk drive to work again!
If you find that the disk seems to be stuck when it is in the drive. Meaning: If you go to push in the release button on the drive and it won't release the disk.
DO THE FOLLOWING AT YOUR RISK
Carefully with power off and power cable unplugged open the QX1
you will see the drive, remove the screen over the drive.
Now look at the release button and follow it into the QX1 until you see a spring that is parallel with the release are. Now to the right of the spring you'll see a brass that looks like a ramp. As you push the release are there is a small piece of metal that can no longer make it over the brass ramp. Careful push the small piece of metal up just enough so that it will clear the ramp. Now push on the release button it should now release the disk, The drive and the QX1 id ready for use once again!!! Good luck
JP6
|